Tuesday, 22 November 2016



ELSEMA PENTA SYSTEM


HIGH SECURITY - EASY INSTALLATION - MAXIMUM PROFITS
CALL US - 0417 223 200


ELSEMA PENTACODE - retro-remotes.com/elsema-penta-remotes

The HIGH SECURITY PentaCODE® dual coding system gives the installer the option to use the classic 12-way dip switch coding or one of over 17 billion encrypted codes. With the 12-way dip switch, just match the key-ring remotes and the receiver’s dip switch and it’s coded. Gives 200m range.

No need for clumsy programmers, memory chips or computer databases to store the code. With the encrypted code you switch all the 12- way dip switches OFF and the remote and receiver automatically goes into the encrypted coding.






The HIGH SECURITY PentaFOB® uses frequency hopping spread spectrum (FHSS). This means that when a button is pressed, it simultaneously transmits the encrypted code on five different frequencies. This makes it impossible for your remote control to be interfered with or jammed. Gives 100m range.

Available in 1, 2, 4 and 5 button configurations. The key-ring retainer is molded as part of the chassis using reinforced nylon making for a super sturdy key-ring mount.  The PentaFOB® series is an extremely versatile remote control that can be customized through a range of configurations and colours to suit your needs.



ELSEMA PENTA KEYPAD - retro-remotes.com/elsema-penta-remotes

The PCKeypad is a wireless keypad with a PentaCODE® transmitter built-in. It works with all of Elsema’s PCR series receivers. The installer has the option to use the classic 12-way dip switch coding or one of over 17 billion encrypted codes. (Please refer to the user manual).  The PCKeypad is suitable for mounting either indoor or outdoor in harsh environments. 

It is housed in a strong vandal proof zinc alloy electroplated case. The Keypad conforms to Ingress Protection 65.  The PCKeypad supports up to 2000 users with 4 to 8 digit PIN.  These features make PCKeypad an ideal choice for gate and door access for homes, shops, factories, warehouses, laboratories, banks and prisons.



ELSEMA PENTA RECEIVERS - retro-remotes.com/elsema-penta-remotes

The HIGH SECURITY PentaCODE® dual coding system gives the installer the option to use the classic 12-way dip switch coding or one of over 17 billion encrypted codes. With the 12-way dip switch, just match the key-ring remotes and the receiver’s dip switch and it’s coded. 

Pre-Wired - Plug In - Wire in either 11-28v or 240v - Pentacode or Pentafob.

No need for clumsy programmers, memory chips or computer databases to store the code. With the encrypted code you switch all the 12- way dip switches OFF and the remote and receiver automatically goes into the encrypted coding.




ELSEMA PENTA EXTENDERretro-remotes.com/elsema-penta-remotes

The Penta Repeater, intelligently repeats the transmission from the PentaFOB® and PentaCODE® remote’s. The repeated signal is with high RF power which can increase the operating range of the remote to 500 metersThe repeater can be powered either by the micro USB connection or 12-24 Volts AC/DC supply.

If multiple repeaters are used for the same application, each repeater can be given different addresses with the digital display. The repeaters memory can be backed up using the PentaFOB programmer.
OPTIONAL
ELSEMA PENTAFOB COMPLEX & TOWNHOUSE RECEIVER PROGRAMMER

The PentaFOB programmer can add, edit and delete individual PentaFOB remotes from the receiver's memory. Simply plug in the USB cable on the back of the programmer and the other end of the cable to the receiver.  

The programmer will automatically detect the receiver model number and then display the corresponding information. With the easy-to-read 4-line large LCD the setup can be done quickly with clear instructions displayed on the screen. Password protect the site to lock out others & maximise your income.


 


No comments:

Post a Comment